Skip to main content

Workflow patterns

For true end-to-end process orchestration, you must be able to accurately express all the things happening in your business processes which will require simple and advanced workflow patterns. This page describes typical patterns and how you can implement them using Camunda and BPMN.

The power of BPMN​

Let's discuss the ISO standard Business Process Model and Notation (BPMN) first, as this is really a great workflow language to express workflow patterns. BPMN was developed as a collaboration of different vendors rooted in real-life industry experience. It happened during a time when the scientific background of workflow patterns was already well researched, for example by the Workflow Patterns Initiative.

In other words, scientists already wrote down all the patterns that are important to express any problem you might get in a workflow, and BPMN used this knowledge to design a language that implemented all the relevant patterns (see this evaluation, for example). Essentially, BPMN is feature complete and will always be able to express what you need to orchestrate your processes.

Additionally, BPMN has expressed all real-life problems rather easily when reflecting on our more than 15 years of hands-on experience with the language.

If you now try to rely on workflow languages that promise to be simpler than BPMN, what it really means is that they lack important workflow patterns. You might want to look in the blog post on why process orchestration needs advanced workflow patterns, showing exemplary workarounds that are necessary if the language cannot express certain patterns.

Typically, this involves emulating advanced patterns with basic constructs plus programming code so that your development takes longer, your solution becomes more brittle, and the resulting process model can't serve as a communication vehicle for business and IT as the model will be contaminated with technical details.

Routing​

The most basic workflow patterns are (excuse the play on words) around the basic flow of work.

Sequence​

See Workflow Pattern 1: Sequence: "A task in a process is enabled after the completion of a preceding task in the same process."

This is implemented by a sequence flow connecting two activities:

The first sequence flow (1) connects the start event with Task A. Then, Task B is connected using another sequence flow, meaning that it can only happen if Task A was completed. If Task B completes, the sequence flow routes to the end event so that the process instance can complete.

You can read more about it in our BPMN primer: sequence flows - controlling the flow of execution.

Conditions (if/then)​

See Workflow Pattern 4: Exclusive Choice: "The thread of control is immediately passed to precisely one of the outgoing branches."

This is implemented by an exclusive gateway (XOR):

All outgoing sequence flows of the XOR gateway (1) have a condition configured, which decides if the process continues in Task B (2 if x>42) or Task C (3if not(x>42)).

You can read more about it in our BPMN primer: gateways - steering flow.

Invoke subworkflows​

You need to invoke another process as part of your process.

This is implemented by a call activity:

1

When the call activity is entered, a new process instance of the referenced process is created. Only when the created process instance is completed is the call activity left and the outgoing sequence flow taken.

You can reference any other BPMN process, for example:

Loop​

See Workflow Pattern 21: Structured Loop: "The ability to execute a task or subprocess repeatedly. The loop has either a pre-test or post-test condition associated with it."

In BPMN, you can simply model a loop:

1

This exclusive gateway contains the expression to decide if to continue or exit the loop. The gateway can be before or after the loop.

There is also a specific loop task marker in BPMN:

note

The loop task marker event is supported in Camunda 7, but not yet in Camunda 8. It is on the roadmap and will eventually be available in Camunda 8.

Static parallel branches​

Imagine you want some tasks known during design time to be carried out in parallel. See Workflow Pattern 2: Parallel Split and Workflow Pattern 33: Generalized AND-Join: "The divergence of a branch into two or more parallel branches each of which execute concurrently" plus "the convergence of two or more branches into a single subsequent branch."

In BPMN, this is implemented using parallel gateways (AND):

1

This AND-gateway splits the flow into concurrent paths so that Task A, B, and C are executed in parallel.

2

This AND-gateway waits for Task A, B, and C to complete before the flow can move on.

You can read more about it in our BPMN primer: gateways - steering flow.

Dynamic parallel branches​

You might want to execute some tasks for every element of a list, like the for each construct in programming languages. See Workflow Pattern 14: Multiple Instances with a priori Run-Time Knowledge: "Multiple instances of a task can be created. The required number of instances may depend on a number of runtime factors, but is known before the task instances must be created. Once initiated, these instances are independent of each other and run concurrently. It is necessary to synchronize the instances at completion before any subsequent tasks can be triggered."

In BPMN, this is implemented using multiple instance activities:

1

The parallel multiple instance marker defines that this subprocess is executed multiple times - once for each element of a given collection (like a for each loop in a programming language).

Wait​

A typical situation is that a process needs to wait for some event to happen, e.g. some time to pass or some external message to arrive. This is related to Workflow Pattern 23: Transient Trigger.

In BPMN, this is implemented using events (or receive tasks):

1

The timer event causes the process to wait, in this case until a specific point in time is due or some duration has elapsed. See timer events for more details.

2

The process will wait for a message to arrive. The message is an external trigger provided by API and can technically be anything, from a callback (e.g. via REST), over real messaging (like AMQP), or to notifications within your system. See message events for more details.

You can read more about events in our BPMN primer: events - waiting for something to happen.

Reacting to events​

The waiting mentioned above is a special case where you react to events while not doing anything else. Oftentimes, you want to react to events even if the process is doing something else at the moment. This is described in this section.

Typical examples are customer cancelation requests coming in for running order fulfillment processes, or timeouts if parts of the process take too long.

Time based​

You want to react if a certain point in time is due or a specific time duration has passed. This is related to Workflow Pattern 23: Transient Trigger.

In BPMN, you can leverage boundary events or event subprocesses.

Those events can be interrupting or non-interrupting, meaning you will either interrupt the current activity, or start something in parallel.

1

This timer is non-interrupting (dashed line), so the Escalate request approval task is started in parallel, additionally to the Approve request task. The idea is that the escalation task might make a manager double-checking the original task does not slip. Non-interrupting events can also be recurring, so you could also escalate "every two hours".

2

This timer is interrupting (solid line). Once it fires, the Approve request task is canceled and the process continues on the alternative path, in this case to automatically reject the request. Note that both timers so far can only happen if the task Approve request is active.

3

This is an event subprocess (dotted line). This can be activated from everywhere in the current scope. In this example, the scope is the whole process.

4

So if the process is not completed within the defined SLA, the timer fires and the event subprocess is started. As the timer is non-interrupting (dashed line again), it does not intervene with the typical flow of operations, but starts something additionally in parallel.

note

The above process is not necessarily modeled following all of our modeling best practices, but intentionally shows different ways to use BPMN to implement certain workflow patterns.

External messages/events​

You might also want to react to certain incoming messages or events in an existing process. A good example is a customer canceling the current order fulfillment process. This might be possible only in a certain process phase and lead to different actions. This is related to Workflow Pattern 23: Transient Trigger and Workflow Pattern 24: Persistent Trigger.

As with timers, you can leverage boundary events or event subprocesses.

Assume that an order cancelation message comes in for the current process instance using message correlation.

1

Subprocesses can be easily used to define phases of a process, as the cancelation is treated differently depending on the current process phase.

2

For example, a cancelation during the clearing phase has no consequences and can simply be executed.

3

But when the process is already in the preparation phase it might need to clean up certain things properly.

4

During delivery, it does not even allow cancelations anymore. This is also why this event is non-interrupting (dashed line), so we keep doing Delivery.

Correlation mechanisms​

Mapping external messages to an existing process instance is called message correlation. This is a crucial functionality to ensure you can communicate with process instances from the outside.

There are two main problems to solve:

  1. How to find the right process instance? In Camunda, this is solved by a message name and a correlation key (e.g. orderCanceled and order-42).

  2. How to persist messages if a process instance is not yet ready to receive that message yet? In Camunda, this is solved by having an internal message store and a time to live attached to messages. This is related to Workflow Pattern 24: Persistent Trigger

You can find more information in our documentation about messages.

Events from subprocesses​

Sometimes, a subprocess needs to communicate with its parent process without ending the subprocess yet. BPMN allows this by an escalation event.

note

The escalation event is supported in Camunda 7, but not yet in Camunda 8. It is on the roadmap and will eventually be available in Camunda 8.

1

An escalation event can be thrown from any of the called subprocesses and is picked up by its parent to start something in parallel, as this is a non-interrupting event (dashed line).

The subprocess can raise the escalation any time:

Broadcasts and engine-wide events​

While messages are always targeted at one specific process instance, you might also want to inform many processes about an event at once. For example, you might regularly adjust certain customer scoring rules that always should be taken into account immediately. This can be implemented using the signal event.

note

The escalation event is supported in Camunda 7, but not yet in Camunda 8. It is on the roadmap and will eventually be available in Camunda 8.

1

The signal event is caught and in this case interrupts the onboarding to go back to score the customer again.

Handling errors​

Handling exceptions well is one of the most important capabilities of a workflow engine, and it needs built-in support from the modeling language.

You might also want to look into our best practice: modeling beyond the happy path to understand possibilities.

Error scopes​

The reaction to errors might need to be different depending on the current state of the process. This can be achieved by using subprocesses in combination with either boundary events or event subprocesses.

1

This boundary error event is attached to the subprocess "clearing" and only catches errors within that subprocess. The idea here would be that in case of any clearing service not being available, the order is assumed cleared. Note that this example is mainly built for illustration, and does not necessarily mean this is the best way to solve this business requirement.

2

Alternatively, this error event subprocess is triggered whenever there is a fraud detected, independent of whether the error occurs in any of the subprocesses or the main process.

Catch errors per type​

You might need to react to different event types differently, which is possible by using the error type known to BPMN:

Now there is a different reaction if fraud was detected (1) or the address was found to contain an error (2).

Business transactions​

Modern systems are highly distributed across the network. In such systems, you cannot rely on technical ACID transactions for consistency, but need to elevate decisions around consistency or regaining consistency to the business level. See Achieving consistency without transaction managers for additional background on this.

Compensation​

An important problem to solve is how to roll back a business transaction in case of problems. In other words, how to restore business consistency. One strategy is to leverage compensating activities to undo the original actions whenever the problem occurs. This is also known as the Saga Pattern.

In BPMN, you can use compensation events to easily implement compensations in your processes.

note

The compensation event is supported in Camunda 7, but not yet in Camunda 8. It is on the roadmap and will eventually be available in Camunda 8.

1

For every task in a process model, you can define a compensation task. This can be any valid BPMN task, like a service task, a human task (2), or a subprocess, for example.

3

This compensation task is connected to the original task by a dedicated compensation event.

4

Within your process model, you can define when it is time to compensate. Whenever you trigger the compensation event, all tasks of the current scope that were executed are automatically compensated. This means that their configured compensation task is executed.

The big advantage is that you don't have to remodel the routing logic to compensate correctly, like checking again if the customer balance was used. The workflow engine will take care automatically, also in more complicated situations like multiple instance activities.