Secure cluster communication

note

TLS between nodes in the same cluster is disabled by default.

Zeebe supports transport layer security (TLS v1.3) between all nodes in a Zeebe cluster. This means it's possible to encrypt all TCP traffic between all nodes of a given cluster.

Enabling TLS for cluster communication is an all or nothing feature: either all nodes are configured to use TLS, or none are. It's not currently possible to only configure some nodes to enable TLS.

Additionally, a small portion of Zeebe traffic is done over UDP, which is left unencrypted. This is purely used for the nodes to gossip topology information amongst themselves, and no sensitive or user-given data is transmitted this way.

Configuration

If you wish to enable TLS for cluster communication, you need to provide two things: a certificate file, and its private key.

The certificate chain file is expected to be a PEM public certificate file, which should contain a x509 public certificate, and may additionally contain an entire certificate chain. If it does include the chain, it should simply be concatenated after the node's certificate.

For example, a simple certificate file with only a single certificate:

-----BEGIN CERTIFICATE-----
...
-----END CERTIFICATE-----

If you wanted to include its signing authority, for example, you would append the contents of the authority's public certificate to the end of the certificate chain file:

-----BEGIN CERTIFICATE-----
...
-----END CERTIFICATE-----
-----BEGIN TRUSTED CERTIFICATE-----
...
-----END TRUSTED CERTIFICATE-----

While each node uses the default Java trust store to verify incoming certificates (configurable via javax.net.ssl.trustStore), which by default uses the system's root certificates, it's recommended to include the complete certificate chain in the file. These will also be used by each node to verify the other nodes' certificates.

note

More specifically, the certificate chain will be part of the trust store of the node, and will be used to verify other node's certificates.

This will allow you to configure each node with a different leaf certificate sharing the same root certificate (or at least an intermediate authority), as long as they're contained in the chain. If all nodes use the same certificate, or if you're certain the certificate is trusted by the root certificates available on each node, it's sufficient for the file to only contain the leaf certificate.

The private key file should be a PEM private key file, and should be the one during generation of the node's public certificate. Algorithms supported for the private keys are: RSA, DSA, and EC.

caution

Note that currently, Zeebe does not support password protected private keys. Since storing the certificates and private keys unencrypted on disk is a security risk, we recommend you use a secret management solution like Vault to inject your certificates in memory at runtime.

Broker

To configure secure communication for a broker, configure its zeebe.broker.network.security section, which looks like this:

security:
    # Enables TLS authentication between this gateway and other nodes in the cluster
    # This setting can also be overridden using the environment variable ZEEBE_BROKER_NETWORK_SECURITY_ENABLED.
    enabled: false

    # Sets the path to the certificate chain file.
    # This setting can also be overridden using the environment variable ZEEBE_BROKER_NETWORK_SECURITY_CERTIFICATECHAINPATH.
    certificateChainPath:

    # Sets the path to the private key file location
    # This setting can also be overridden using the environment variable ZEEBE_BROKER_NETWORK_SECURITY_PRIVATEKEYPATH.
    privateKeyPath:

The certificateChainPath and the privateKeyPath can be relative to your broker's working directory, or can be absolute paths.

Gateway

To configure secure communication for a standalone gateway with the rest of the cluster, configure its zeebe.gateway.cluster.security section, which looks like this:

security:
    # Enables TLS authentication between this gateway and other nodes in the cluster
    # This setting can also be overridden using the environment variable ZEEBE_GATEWAY_CLUSTER_SECURITY_ENABLED.
    enabled: false

    # Sets the path to the certificate chain file.
    # This setting can also be overridden using the environment variable ZEEBE_GATEWAY_CLUSTER_SECURITY_CERTIFICATECHAINPATH.
    certificateChainPath:

    # Sets the path to the private key file location
    # This setting can also be overridden using the environment variable ZEEBE_GATEWAY_CLUSTER_SECURITY_PRIVATEKEYPATH.
    privateKeyPath:

note

The certificateChainPath and the privateKeyPath can be relative to the gateway's working directory, or can be absolute paths.

How it works

When enabled for each node, communication over TCP between these is securely encrypted using the provided certificates in a client-server model.

For example, let's take two nodes (A and B). When A (the client) sends a request to B (the server), they perform a TLS handshake, wherein B's certificate is exchanged and verified by A. Afterwards, the request is encrypted such that only a node with B's private key may decrypt it (i.e. in this instance, B).

When the roles are reversed (e.g. B sends a request to A), the same handshake occurs, but the other way around. AsB is now the client, and A the server, A's certificate is exchanged and verified by B. Afterwards, all communication is encrypted and can only be decrypted with A's private key.

note

In this model, only the client verifies the identity of the server, as opposed to mTLS, in which both client and server exchange and verify one another's identities. If you need mTLS, it's currently recommended to explore a solution which provides this transparently like a service mesh (e.g. Linkerd or Istio).

Self signed certificates

If you wish to use self-signed certificates for testing or development purposes, the simplest way is to have all nodes share the same certificate. As aforementioned, the certificate chain configured on a node is also part of its trust store. As such, if all nodes share the same certificate, they will have no trouble verifying the identity of the other nodes.

You can still configure a different self-signed certificate for each node, provided they can be verified by the other nodes' certificate chain.

For example, let's say you have your own root certificate authority you use to sign your own certificates, and one certificate for each node that you signed with that authority. For each node, you can then create a certificate chain file which would consist of the node's public certificate, followed by the root certificate authority's public certificate. Though each node would have a different leaf certificate it uses to identify itself, the other nodes could verify its identity since their certificate chain contains an authority used to sign it.

Testing & example

To generate your own self-signed certificates for testing, you must first create a certificate authority.

note

For this example, whenever you are asked for input, feel free to just press enter and leave the defaults there.

openssl req -new -newkey rsa:2048 -nodes -out ca.csr -keyout ca.key
openssl x509 -trustout -signkey ca.key -days 365 -req -in ca.csr -out ca.pem

Once we have our certificate authority, we can now generate certificates for each node. Let's say we have a cluster of three nodes, A, B, and C.

Take the following steps:

Generate a private key for each node:

openssl genpkey -out nodeA.key -algorithm RSA -pkeyopt rsa_keygen_bits:2048
openssl genpkey -out nodeB.key -algorithm RSA -pkeyopt rsa_keygen_bits:2048
openssl genpkey -out nodeC.key -algorithm RSA -pkeyopt rsa_keygen_bits:2048

Create a certificate signing request (CSR) for each as well:

openssl req -new -key nodeA.key -out nodeA.csr
openssl req -new -key nodeB.key -out nodeB.csr
openssl req -new -key nodeC.key -out nodeC.csr

Create the final certificates for each node:

openssl x509 -req -days 365 -in nodeA.csr -CA ca.pem -CAkey ca.key -set_serial 01 -out nodeA.pem
openssl x509 -req -days 365 -in nodeB.csr -CA ca.pem -CAkey ca.key -set_serial 01 -out nodeB.pem
openssl x509 -req -days 365 -in nodeC.csr -CA ca.pem -CAkey ca.key -set_serial 01 -out nodeC.pem

Create the certificate chain so that each node is able to verify the identity of the others:

cat nodeA.pem ca.pem > chainNodeA.pem
cat nodeB.pem ca.pem > chainNodeB.pem
cat nodeC.pem ca.pem > chainNodeC.pem

You can now configure each node using its respective final chainNode*.pem file and node*.key file. For example, if node A was a broker:

security:
    enabled: true
    certificateChainPath: chainNodeA.pem
    privateKeyPath: nodeA.key

Configuration​

Broker​

Gateway​

How it works​

Self signed certificates​

Testing & example​

Configuration

Broker

Gateway

How it works

Self signed certificates

Testing & example